SELECT BEFORE WEARING

SIZE GUIDE


An accurate measurement helps narrow down your choices. A perfect fit also depends on the jewelry's structure and how you want it to sit on your body. This guide helps you measure rings, bracelets, and necklaces, and interpret adjustable designs before placing your order.

Size is the data for selection. A feeling of fit is what jewelry must achieve.

01 START WITH THE FIT

The right fit is more than a number.

A piece of jewelry is beautiful when its proportions suit your body and the way you want to wear it.

For rings, what matters is not only finger circumference but also the knuckle, the width of the band, and how each design feels on the hand.

For bracelets, wrist size needs to be considered alongside the style: a rigid bangle, a cuff, a chain, or a design with an adjustable section will each feel different even at the same measurement.

For necklaces, length does not determine where the piece sits in any absolute way. Neck circumference, build, pendant size, and layering can all change where the jewelry falls when worn.

That is why JADELORA treats measurements as a starting point for choosing, not a formula applied identically to every design.

Measure accurately first. Then decide whether you prefer a snug fit or a little room.

02 RING

Measure your finger, including the knuckle.

The most accurate way to determine ring size is to use a ring sizer or have someone with professional tools measure directly. GIA considers a set of finger gauges the most reliable method, and notes that temperature, time of day, dominant hand, and band width can all affect how a ring fits.

If you already have a ring that fits the finger you plan to wear it on, measure the inner diameter of that ring. Place the ring on a flat surface and measure from one inner edge to the opposite inner edge across the center of the circle.


The string or paper method can be useful for estimating at home, but it is prone to error from stretching, shifting, or uneven tension. When higher accuracy is needed, JADELORA prefers a ring sizer or a sample ring that already fits the intended finger.

When measuring, check both where the ring will sit and the knuckle it must pass over. A ring that fits at the base of the finger but cannot pass the knuckle is still not the right size.

Avoid measuring when your hands are too cold or too warm. Cartier also recommends measuring at the end of the day and notes that your two hands may differ slightly in size.

If you are between sizes, look for a fit that passes comfortably over the knuckle without spinning loosely once worn.

Measuring ring size using the inside diameter or a ring sizer
02 RING
03 RING SIZE REFERENCE

Consider circumference and diameter together.

Inner diameter 14,1 mm → circumference approx. 44,2 mm → US 3
14,5 mm → 45,5 mm → US 3.5
14,9 mm → 46,8 mm → US 4
15,3 mm → 48,0 mm → US 4.5
15,7 mm → 49,3 mm → US 5
16,1 mm → 50,6 mm → US 5.5
16,5 mm → 51,9 mm → US 6
16,9 mm → 53,1 mm → US 6.5
17,3 mm → 54,4 mm → US 7
17,7 mm → 55,7 mm → US 7.5
18,1 mm → 57,0 mm → US 8
18,5 mm → 58,3 mm → US 8.5
18,9 mm → 59,5 mm → US 9
19,4 mm → 60,8 mm → US 9.5

............................................

A size chart converts measurements, but the ring’s actual construction determines how it feels on your finger.

Ring_size_guide
03 RING SIZE REFERENCE
04 BRACELET

Measure your wrist where the bracelet will sit.

Wrap a soft measuring tape around your wrist where you plan to wear the bracelet. If you use string or a strip of paper, mark where the ends meet, lay it flat, and measure it with a ruler.


Measure when your hand is at a normal temperature, rather than immediately after exposure to extreme heat or cold. Measuring again at another time of day can also help confirm consistency.

Once you know your wrist circumference, choose your preferred fit:

Snug fit: close to your wrist measurement, suitable for cuffs or designs intended to stay in place.

Regular fit: leaves a little room for movement without sliding too far down onto the hand.

Relaxed fit: allows noticeably more room, suitable for chain bracelets or a softer, more flexible look.


Measure your wrist directly where you intend to wear the bracelet rather than estimating from a different bracelet design. This is general guidance, not a fixed amount to add for every style.

If you are between sizes, choose the larger size when the bracelet is not adjustable.

A size chart converts measurements, but the ring’s actual construction determines how it feels on your finger.

Measuring wrist circumference to choose a bracelet size
04 BRACELET
05 NECKLACE

Length shapes placement; your body determines the drape.

For necklaces, what matters is not finding a single "neck size" but understanding where the chain length will fall on your own body.

Some common lengths for reference:


  • approx. 40–41 cm: usually sits close to the base of the neck;

  • approx. 45–46 cm: a common position for short necklaces;

  • approx. 50–51 cm: falls lower than the collarbone;

  • approx. 60–61 cm: creates a longer drop and is convenient for layering.

These reference lengths only help you picture the relative position. The actual position also depends on neck circumference, build, pendant size, and how the piece is styled on the body.

The simplest way to check is to take a soft cord cut to the exact length of the piece you are considering, place it around your neck, and look in a mirror.

If the design has a pendant, factor in the pendant's size and proportions as well. The same chain length can feel completely different on the body with a small pendant versus a large one.

When layering several chains, check each length on your body to create sensible spacing between layers and avoid pendants overlapping unintentionally.

The length information on each product page always takes priority when making your choice.

The same chain length can sit differently on different people. Consider how it looks on the body, not just the measurement.

Necklace placement on the body at different chain lengths
05 NECKLACE
06 EARRINGS & ADJUSTABLE DESIGNS

Size means different things for different jewelry.

Earrings usually do not have a size system like rings. Instead, read details such as diameter, overall length, decorative element size, clasp type, and weight if that information is published on the product page.

A 12 mm hoop and a 30 mm hoop do not differ in "ear size"; they differ in proportion and in how they present on the face.

Similarly, open rings, bracelets with an extension chain, or adjustable designs do not mean they suit every size.

Adjustability is always limited by the product's actual construction. Use the adjustment range published on each product page rather than trying to widen or tighten a design beyond it.

For pieces with jade, stones, or delicate construction, forcing adjustment too far can also put stress on the setting, the joints, or the metal body.

“Adjustable” does not mean “one size fits all.”

jadelora_earrings_size_guide
06 EARRINGS & ADJUSTABLE DESIGNS
07 IF YOU ARE STILL UNSURE

Check your measurements instead of guessing.

If two measurements give different results, measure again at a different time before ordering.

For rings, prioritize a measurement from a ring sizer or from a ring that already fits the intended finger. If your knuckle is noticeably larger than the base of your finger, factor in that the ring must pass over the knuckle.

For bracelets, check again on the correct wrist and at the exact spot where it will be worn. Your two wrists may not be exactly the same.

For necklaces, simulating the length with a soft cord in front of a mirror is usually more helpful than imagining it from a product photo.

And if a product has a special construction, a wide band, a rigid bangle, or a limited adjustment range, the information on the product page itself always takes priority over the general reference chart.

JADELORA can help you match your measurements to a design before you order. All you need to send is the product type, the measurements you have, and the feel you want: snug, regular, or relaxed.

The goal is not to find a perfect number, but to find jewelry that fits you properly.